Specifications+
- Functions as an omni-directional blade when cutting thin material like stained glass, but thicker materials should only be cut using a forward and backward motion
- Great blade for dense materials - "teardrop" design cuts dense glass, tile, stone, shell, nonferrous metals, and hard plastics such as acrylic and lexan
- Cuts mainly on the front and back, so to create a curve you will guide the material around the blade - any sideways cutting will leave a large wide swath
- It's rigidity has the ability to damage the saw itself if used improperly by pushing too hard
- Keep in mind the "golden rule" to let the saw do the cutting and do not force the material
- It is best to avoid cutting thin dichroic glass with this blade as it will likely chip!
- Comes with 2 orange groove grommets
- Blade shape: Round 0.072 Diameter (note 1/16" equals 0.063 and 1mm equals 0.0394) The grain is aggressive.
- Material thickness Capacity: 3/8", normal use is 1/8" art glass, 1/4" soft wall tile.
- What to Avoid: Do not use on ceramic tiles, 3/8" molten glass or thick materials in general.
- Average blade life: 40-60 hours